Compro Technology TN2200, Руководство пользователя

Страница: 13 / 76

3-1 Wall / Ceiling Mount <頁頁頁頁頁頁>
Chapter 3: Installtion
Chapter 3: Installation
Wall / Ceiling Mount
The camera can be mounted on a wall or ceiling with or without the supplied wall mount base installed. The
wall mount base is generally used for wall mount applications when the camera’s cable is not run through the
mounting surface.
Reset Button
Composite Video Output
microSD card slot
Wall Mount Base
Figure 3-1. Wall Mount Base
If you want to feed the camera’s cable through a dropped ceiling, you can drill a cable hole on the mounting
surface and then mount the camera without using the wall mount base. The following sections explain 2 dif-
ferent mounting options.
Using Wall Mount Base
1. Use the supplied hex key to unscrew the top cover from the camera.
Rubber O-ring
Figure 3-2. Remove top cover
2. Stick the supplied drill template A to the wall (or place the wall mount base against the wall to mark the
screw hole locations). Then drill 4 mounting holes on the wall.
Rubber O-ring
Figure 3-3. Drill template A
3. Then, if you’re mounting on a concrete wall, insert a screw anchor into each of the mounting holes. After
that, secure the wall mount base to the wall with the supplied self-tapping screws.