Compro Technology TN2200, Руководство пользователя

Страница: 50 / 76

6-10 Event Setup Event Setup
Compro TN2200 - User’s Manual
Figure 6-11. Notify server setup
HTTP server
If available, enter the address of your NVR's HTTP server. The HTTP URL entered here is meant for the cam-
era to use HTTP protocol to send a notification message to your network video recorder's HTTP server
when unusual events are detected by the camera. The NVR can then respond to the notification message.
Figure 6-12. HTTP server setup
SMS server
Here it provides the configuration for SMS notification feature that allows the camera to send a SMS (Short
Message Service) alert message to one or more pre-defined recipients when a pre-defined event scenario
is being triggered. This feature does not require additional hardware GPRS modem and SIM card installed.
Users only need to first apply an account with a third-party, web-based SMS gateway service provider. To
properly configure SMS server:
1. Under [Setup] > [Event Setup] > [Event Server Setup], click on [SMS server] to start configuration.
2. Provide the required data for the following field:
Field Description
Service provider Default: Clickatell
User name User name registered at Clickatell
API ID API ID provided by Clicktatell
Target country The country code for recipient’s mobile phone num-
ber
Target cell phone Recipient’s mobile phone number. Enter only one
recipient number in each field.
Table 6-3. SMS server setting
If you do not have a Clickatell account yet, please visit [www.clickatell.com], and click [SIGN UP]. Then
go ahead to sign up to the “Clickatell Central (API)” service and follow Clickatell’s online instructions to
obtain an API ID.
3. Choose [Next] to save the setting.
4. Customize the SMS message content if wanted. Choose [Next].
5. To receive a test message, click on [Send me a SMS message to the SMS Gateway]. Or choose [Finish]
to save the configuration.
6. To enable SMS notification, go to [Setup] > [Event Setup], and click on [Trigger Setup] to create a new