Operation
2-23
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: c-ch2 Operation Last Saved On: 3/1/99 2:14 PM
Scroll List - ‘To’ Line
There is another limitation on the ‘To’ list. If you have selected a drive on the
‘From’ screen, the ‘To’ list can include only slots. If you have selected a slot
on the ‘From’ screen, the ‘To’ list can contain only drives.
Let us assume that you want to load the cartridge that is in Slot 4 into any
available drive. Use the
button to scroll line two to Slot 4. The screen
shown n Figure 2-27 appears:
From:
Slot4
To:
*DLT0
Figure 2-27. Load/Unload ‘From‘ Entry Screen
When you have scrolled to your desired source, press the
Enter
button to select it.
Notice that in Figure 2-28, two changes occur in the display.
The * reappears at the beginning of line 2, indicating that you have made a
selection.
The
now moves to line 4, indicating that you may now select a destination.
From:
*Slot4
To:
*DLT0
Figure 2-28. Load/Unload ‘To’ Entry Screen
You can now simply press the
Enter
button to select DLT0 as the destination.
Note that there is no
at the end of line 4, nor
at the end of line 1. There
are no additional choices because 1) you have selected a slot as the source, so
the destination must be a drive, and 2) DLT1 already has a cartridge in it, so it
cannot be a valid destination. Press the
Enter
button to select DLT0. In
response, the Confirmation Screen shown in Figure 2-29 appears:
From: Slot4 To:DLT0
ENTER To Execute
ESCAPE To Cancel
Figure 2-29. Confirmation Screen
As the confirmation screen indicates, to execute the load or unload, press the
Enter
button. If the confirmation screen does not show your intended source
and destination, press the
Escape
button to return to the ‘From’ entry screen.