2-22
TL891 MiniLibrary System User's Guide
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: c-ch2 Operation Last Saved On: 3/1/99 2:14 PM
A default screen is shown in Figure 2-24 From the Default Screen, enter the
Menu Mode by pressing the
Enter
button. The Main Menu shown in Figure 2-
25 appears:
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Figure 2-25. Main Menu
The
is next to the line that reads ‘Load/Unload'. Press the
Enter
button to
display the first Load/Unload submenu, which is shown in Figure 2-26:
From:
DLT1
To:
*Slot3
Figure 2-26. Load/Unload Initial Screen
In Figure 2-26, the
is next to line 2 of the display. Line 2 shows the top
item in a scrollable list of sources. Note that a
has appeared on the right of
the bottom line. This indicates that the
button may now be used to scroll
through the list, and that the top item on the list is displayed. As soon as you
press the
button, three things happen:
The list scrolls down one item (only line 2 scrolls).
A
appears on the right of line 1 of the display. This indicates that there is
one or more items above the item displayed on line 2.
The * at the left of line 2 disappears. This is because the * indicates the current
selection or the default selection, and you have scrolled the default selection
offscreen, and haven’t yet selected an item from the list.
NOTE:
The contents of the lists on line 2 and line 4 will vary as follows:
Initial Screen - ‘From’ Line
The list on line 2 in Figure 2-26 (the ‘From’ line) will include every drive and
every magazine slot (including mail slots) that has a cartridge in it (you can’t
get a cartridge from a slot or drive that is empty).
Initial Screen - ‘To’ Line
The list on line 4 of Figure 2-26 (the ‘To’ line) will include all of the valid
destination choices, that is, drives and slots that are empty (you can’t put a
cartridge into a slot or drive which already has one in it).