5-4
TL891 MiniLibrary System User's Guide
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.AO1 File Name: f-ch5 Regular Maintenance Last Saved On: 3/1/99 2:15 PM
6.
As the confirmation screen indicates, to execute the cleaning operation,
press the Enter button. If the confirmation screen does not show your
intended drive and cleaning cartridge, press the Escape button to return
to the Cleaning Submenu.
When you press the Enter button, The screen shown in Figure 5-5 appears:
Clean: DLT0
Use: Slot0
Cleaning In Progress
Figure 5-5. Cleaning In Progress Screen
When the cleaning operation is completed, the Default Screen reappears.
Removing the Cleaning Cartridge
NOTE:
If the Base Module is installed in a sufficiently secure area, you may elect not to
use the Magazine Security Lock. In that event, leave the lock in the unlocked position.
1.
Examine the Default Screen on the Control Panel to determine whether
any cartridges are loaded into the drives. If so, then unload each using
the Load/Unload Menu, as described in Chapter 2, Operation.
2.
Using the key provided (if necessary), Unlock the Magazine Security
Lock on the front panel.
3.
Press the Unlock/Open Button on the front panel.
4.
Remove the magazine from the Base Module.
5.
Remove the cleaning cartridge from the magazine.
6.
Insert any desired data cartridge into the slot vacated by the cleaning
cartridge.
7.
Press the Unlock/Open Button on the front panel.
8.
Insert the magazine into the Base Module.
9.
Using the key provided, lock the Magazine Security Lock on the front
panel (optional).