manualshive.com logo in svg

Compaq ProLiant 5500, Руководство по установке и настройке, Страница: 83 / 159

Поделиться
Скачать
Compaq ProLiant 5500 Скачать руководство пользователя страница 83

4-18

    

Installing Hardware Components

For use with Intel Pentium II Xeon processor-based servers only

Writer: Salvo   Project: Compaq ProLiant 5500 Servers Setup and Installation Guide   Comments: 328470-001\July 1998

File Name: E-CH04.DOC   Last Saved On: 7/13/98 8:13 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Installing the Duplex Drive Cage Option

Be sure you have followed all the steps under “Accessing the Drive Cage Back
Plane” before proceeding with the following steps.

1.  Remove any components in the removable media bays and install them

into the duplex drive cage.

2.  Replace the drive cage.  Do not push it back fully until after you install

cables.

CAUTION:

    The SCSI backplane board must have a Duplex

Enabler board installed in order for the SCSI bus to be terminated
properly. If this board is not installed, the service LEDs of all
drives will light as a warning.

Figure 4-17.    Installing the duplex drive cage

Содержание ProLiant 5500
































































































































































Отзывы:

Нет отзывов