Compaq ProLiant 5500, Руководство по установке и настройке, Страница: 38 / 159

2-6 Installation Overview
For use with Intel Pentium II Xeon processor-based servers only
Writer: Salvo Project: Compaq ProLiant 5500 Servers Setup and Installation Guide Comments: 328470-001\July 1998
File Name: C-CH02.DOC Last Saved On: 7/6/98 10:37 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
■
Turn on the computer and insert the SmartStart and Support Software
and Support Software CD to configure and manage the server. When the
server boots from the SmartStart and Support Software program, it
automatically starts the System Configuration Utility. See Chapter 5 for
detailed information.
■
Register your server.
For complete details on the SmartStart and Support Software program, read the
SmartStart and Support Software installation card included in your SmartStart
and Support Software package.
After the SmartStart and Support Software program has finished configuring
your system, you have completed the installation of your new Compaq server.
Installing a Tower Model
Below are the general steps for installing your tower model ProLiant 5500
Model 6/400-512 server:
■ Unpack the server.
■
Install any hardware options in the server. See Chapter 6 for installing
the Integrated Management Display in your tower model. See Chapter 4
and the options kits for detailed instructions on installing other options
and components.
■
Set switches: peripheral board switches, system board switches, and
SCSI ID settings.
■ Connect cables: keyboard, mouse, monitor, network, and power cables.
See Chapter 7.
■ Turn on the computer and insert the SmartStart and Support Software
and Support Software CD to configure and manage the server. When the
server boots from the SmartStart and Support Software program, it
automatically starts the System Configuration Utility. See Chapter 5 for
detailed information.
■
Register your server.