4-5
Compaq ProLiant 5500 Servers Setup and Installation Guide
For use with Intel Pentium II Xeon processor-based servers only
Writer: Salvo Project: Compaq ProLiant 5500 Servers Setup and Installation Guide Comments: 328470-001\July 1998
File Name: E-CH04.DOC Last Saved On: 7/13/98 8:13 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
1. To add a processor, identify the processor locations as shown in
Figure 4-2.
NOTE
. Processors can be installed in any processor socket. All four processor
sockets must have either a processor module or a terminator board installed
for proper bus termination.
1
2
3
4
Figure 4-2. Processor locations
2. Remove one of the terminator boards by turning the retaining knob
counterclockwise, releasing the side tabs and pulling up as shown in
Figure 4-3.
Содержание ProLiant 5500
Страница 8: ......