Compaq ML570 - ProLiant - 1 GB RAM, Руководство по устранению неисправностей

Страница: 139 / 204

Error messages 139
207-Memory Configuration Warning - DIMM In Socket X does not have Primary
Width of 4 and only supports standard ECC.
Advanced ECC does not function when mixing DIMMs with Primary Widths of x4 and x8.
Audible Beeps : 1 long, 1 short, or none
Possible Cause : Installed DIMMs have a primary width of x8.
Action : Install DIMMs that have a primary width of x4 if Advanced ECC memory support is required.
208-Memory Board Error - This error could be the result of a bad or improperly
installed memory board or a system board issue
Audible Beeps : 1 long, 1 short
Possible Cause : The memory board is bad or improperly installed, or there is a system board issue.
Action : Reseat the memory board. If this does not resolve the issue, either replace the memory board or
replace the system board.
209-Online Spare Memory Configuration - No Valid Banks for Online Spare
Audible Beeps : 1 long, 1 short
Possible Cause : Two valid banks are not available to support an online spare memory configuration.
Action : Install or reinstall DIMMs to support online spare configuration.
209-Online Spare Memory Configuration - Spare Bank is Invalid
Audible Beeps : 1 long, 1 short
Possible Cause : Installed DIMMs for online spare bank are of a size smaller than another bank.
Action : Install or reinstall DIMMs to support online spare configuration.
209-Hot-add Memory Configuration - Boards must be installed sequentially.
Audible Beeps: 1 long, 1 short
Possible Cause: Memory boards are not installed sequentially.
Action : Install or reinstall memory boards sequentially.
209-Invalid Lockstep memory configuration
Audible Beeps : 1 long, 1 short
Possible Cause : The memory is not installed properly to support Lockstep mode.
Action : See the server documentation for supported Lockstep memory configurations.