POST Error Messages
F-8
Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: o-appf POST Messages
Codename: Executor Part Number: 266328-001 Last Saved On: 4/18/02 2:47 PM
Table F-1: POST Error Messages
continued
Message
Description
Meaning and Recommended Action
1774
Slot x drive array –
obsolete data found in
array accelerator. Data
found in accelerator
was older than data
found in drives.
Obsolete data has
been discarded.
Data found on the array accelerator is older than
data found on drives due to drives having been
disconnected, used on another controller, and then
reconnected. Press the
F1
key to discard older
data.
1775
Slot x drive array –
Proliant storage
system not responding
SCSI port (y): Check
storage system power
switch and cables.
Power the system
down while checking
the ProLiant power
and cable connections,
then power the system
back up to retry.
Power the system down. Check the external
ProLiant power switch—external drives must all be
powered up before or at the same time as the
main system. Check cables. If retrying does not
help, update the ProLiant system firmware, or try
replacing the cable, ProLiant storage backplane,
or the array controller.
1776
Slot x drive array –
SCSI bus termination
error – internal and
external drives cannot
both be attached to the
same SCSI port.
SCSI port (y): Check
the cables
The internal and external connectors of the
specified SCSI port(s) are both attached to drives.
The SCSI bus is not properly terminated when
internal and external drives are attached
concurrently to the same SCSI bus. The indicated
SCSI bus is disabled until this problem is resolved.
Turn off the server power and check the cabling to
the specified SCSI port.
continued
