Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide
6-1
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: g-ch6 configuring the system
Codename: Executor Part Number: 266328-001 Last Saved On: 4/18/02 2:39 PM
6
Configuring the System
When installing a controller in a
new
system, perform these tasks after installing the
controller and updating the controller firmware:
•
Configure the system by using either the ROM-Based Setup Utility (RBSU) or
the System Configuration Utility (SCU), following the procedure given in the
server user guide.
•
Set the boot controller by using RBSU, or the Option ROM Configuration for
Arrays (ORCA) utility (described in this chapter).
•
Create at least one logical drive by using ORCA or ACU (as described in
Chapter 7).
Using RBSU
RBSU is a system configuration utility that is embedded in the system ROM, and is
customized for the server on which it is installed. RBSU is updated by using System
ROMPaq.
IMPORTANT:
Not all servers support RBSU.
To use RBSU:
1.
Power up the server.
