manualshive.com logo in svg

Compaq DL360 - ProLiant - Photon, Руководство пользователя

Поделиться
Скачать
Compaq DL360 - ProLiant - Photon Скачать руководство пользователя страница 109

POST Error Messages

Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide

F-3

COMPAQ CONFIDENTIAL

Writer: Amy L. Laffitte File Name: o-appf POST Messages

Codename: Executor Part Number: 266328-001 Last Saved On: 4/18/02 2:47 PM

Table F-1:  POST Error Messages 

continued

Message

Description

Meaning and Recommended Action

1724

Slot x drive array –
physical drive position
change(s) detected –
logical drive
configuration has
automatically been
updated.

Logical drive configuration has been updated
automatically following physical drive position
changes. Press the 

F1

 key to resume.

1726

Slot x  drive array –
array accelerator
memory size change
detected – array
accelerator
configuration has
automatically been
updated

This message is displayed if the controller is
replaced with a model that has a different amount
of cache memory.

1727

Slot x  drive array –
new logical drive(s)
attachment detected (if
>32 logical drives, this
message will be
followed by 

Auto-

configuration failed:
too many logical
drives

)

The controller has detected an additional array of
drives that was attached when the system was
powered down. The logical drive configuration
information has been updated to add the new
logical drives. The maximum number of logical
drives supported is 32—additional drives will not
be added to the configuration if this number is
exceeded. Press the 

F1

 key to resume.

1728

Slot x drive array –
abnormal shutdown
detected with write
cache enabled.

No array accelerator
battery backup on this
model array controller.

Any data that may
have been in array
accelerator memory
has been lost.

This message should never occur unless the write
cache is somehow enabled on a controller that
does not have batteries.

continued

Содержание DL360 - ProLiant - Photon














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды