Configuring an Array
Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide
7-27
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: h-ch7 Configuring an Array
Codename: Executor Part Number: 266328-001 Last Saved On: 2/8/02 10:39 AM
Running CPQONLIN
1.
Enter
cpqonlin
at the console prompt.
2.
Use the arrow keys to highlight
Array Configuration Utility
, and then press the
Enter
key.
3.
From the list of controllers that is presented, select the one that you want to
configure.
—
If no logical drives are configured for the controller, the auto-configuration
wizard screen (see Figure 7-21) is displayed.
—
If logical drives are present on the controller, the manual configuration
screen (see Figure 7-22) is displayed.
Press the
F1
key for online help at any time on either screen.
Automatic Configuration
Figure 7-21: CPQONLIN auto-configuration wizard
1.
If the proposed logical configuration shown on the wizard screen is acceptable,
highlight the fault tolerance level that you want for the logical drive and press the
Enter
key. Otherwise, select
Custom Configuration
and continue the procedure
as described in the “Manual Configuration” section.
2.
Press the
Esc
key to save the changes and return to the controller selection
screen.
