Control Station Duetto
WebConfig configuration
1.7/1217
85
Customize elements
The position and size of any element in the full screen (
) and keypad sidebar (
can be configured in the virtual screen preview. The grey configuration field of the virtual screen pre-
view serves as a 1:1 view of the displayed screen of the DUETTO device. All added elements in the vir-
tual screen preview will be displayed the same way (position and size) on the display (except colour
design and resolution). You can define elements via the input of absolute values of size and position,
or directly with the cursor.
Customize Size and Position
With following functions you can change size and position of elements:
Adjust size and position via absolute values in the coordinate system
Functions: size and position
Size
:
Select the desired element in the virtual screen preview.
In the field
Size
enter the desired width and height of the element in pixels.
Click on the button
APPLY
to save the settings.
Position
:
Select the desired element in the virtual screen preview
In the field
Position
enter the desired coordinates of the element in pixels.
Click on the button
APPLY
to save the settings.
Function
Description
Size
Here you can define the width and the height of elements (in pixels).
Position
Here you can define the absolute position of elements (in pixels). The zero point is lo-
cated at left upper corner of the screens.
Snap to grid
Activate this checkbox to align elements automatically along the virtual grid.
GOOD TO KNOW: Aspect ratio of screens
The screens of the DUETTO device have a aspect ratio of 800 px to 401 px.
1.6
140 p
x
115 p
x
129 px
196 px
1
2
