WebConfig configuration
Control Station Duetto
68
1.7/1217
Notifications
In this section, the system for monitoring the DUETTO can be defined (“management station”), a filter
for sending GET-REQUEST commands can be established and the freely configurable MIB objects for
requesting the description and location of the DUETTO is configured.
Configuration WebConfig
CONFIGURATION > SNMP
The following dialogue appears:
WebConfig “SNMP”
Traps active
: Activate this checkbox to enable sending of traps to the management station.
Object name
OID
Description
Additional objects
sipStatusNotification
.1.3.6.1.4.1.41836.1.0.1
Sent on SIP state
changes
sipCallNumber, sipConversationStatus
(outgoing, terminated, error)
ioipSttausNotification
.1.3.6.1.4.1.41836.1.0.2
Sent on Intercom
state changes
ioipCallNumber, ioipConversationStatus
(outgoing, terminated, error)
sipRegistration-
Notification
.1.3.6.1.4.1.41836.1.0.3
Sent on SIP server
registration changes
sipRegistrationStatus (Progress, Ok,
Cleared, Failed)
ioipRegistration-
Notification
.1.3.6.1.4.1.41836.1.0.4
Sent in Intercom
server registration
changes
ioipRegistrationStatus (Progress, Ok,
Cleared, Failed)
handsetOffhook-
Notification
.1.3.6.1.4.1.41836.1.0.5
Sent when the hand-
set is hooked-off
-
inputChanged-
Notification
.1.3.6.1.4.1.41836.1.0.6
Sent on changes of
the digital inputs
din[1,2]Status (1 (connected),
2 (not connected)
coldStart
.1.3.6.1.6.3.1.1.5.1
Sent on a cold start
of the device
-
GOOD TO KNOW: What are traps?
Independently from the values of the MIB, so-called traps will be sent. Traps are unrequested
messages of an agent to the management station, reporting that a specific event has occurred (e.g.
conversation between two SIP stations has been established).
