Control Station Duetto
WebConfig configuration
1.7/1217
59
Additional event settings
Condition
: In this drop-down list, the condition can be selected for the previously selected event
), which has also to be fulfilled in order to execute an action. The following condition is
available:
Event
Function
Logic tag triggered
This event is fulfilled, when:
The action „Logic tag triggered“ is triggered; the same logic tag is assigned
), or
A button is tapped on the display; the same logic tag is assigned in the section
Functionality
(
).
NOTES
:
In the WebConfig, this logic rule will be shown with the corresponding tag
name triggered. The icon is shown for easier identification. For an example,
.
In order to save the logic rule, a valid logic tag name must be entered.
GOOD TO KNOW:
What is a logic tag?
Logic tags are used to connect elements (buttons or logic rules). For example, a button click can be
used as a trigger ("Event") of a "Logic Rule". Conversely, "Logic Rules" can execute "Actions" that
change the appearance of buttons. In both examples, the mapping is carried out with the help of log-
ic tags. It is possible to define multiple logic tags for each DUETTO device.
Phone DND toggled
This event is fulfilled when the DND mode (“Do not disturb”) has been toggled
either with the native button (
) or with the logic rule action “Tog-
gle phone DND” (
).
Event conditions
is
In order to fulfill the event, the event value (e.g. SIP call number)
has to match the entire entry in the lower field.
is not
In order to fulfill the event, the event value (e.g. SIP call number)
must not match the entry in the lower field.
any
The event is fulfilled by any event value.
Condition
Function
Pending calls
The condition is fulfilled when the selected number of calls (regardless of
call type) are pending on the DUETTO device (0 = no pending calls active;
i.e. these calls have not been accepted yet).
NOTE
: In Intercom mode, the pending calls correspond with incoming call
requests (normal and emergency call).
1.5
1.5
1.3
