Setup guide
Control Station Duetto
16
1.7/1217
CCT 800 configuration
Depending on the respective functions to be enabled or used for DUETTO, some of the instructions
may not be relevant and can therefore be skipped.
Add control desk function
DUETTO has the same configuration procedure as a conventional IP station and it is recognised by
CCT 800 as such. For further information about in-depth configuration, see manual “
Intercom Server
Configuration
“.
Configuration CCT 800
Subscriber > Station Properties > IP terminals >
tab
Common
Terminal IP Address
: In this field, enter the same IP address, which is configured in IP Station
Config or WebConfig for the DUETTO device.
Port
no
: In this field, enter the same port number, which is configured in IP Station Config or Web-
Config for the DUETTO device.
→
By default: 16400
Dynamic
registration
: Activate this checkbox to enable the dynamic registration. The field
MAC
address
will be activated.
MAC address
: In this field, the MAC address of DUETTO can be entered. The MAC address will be
configured automatically if the checkbox
Dynamic registration
is deactivated.
ATTENTION: Only for Intercom function
This installation step is only required for devices that will be configured as Intercom stations!
ATTENTION: DUETTO must be initialized when changing terminal port
When a new device type is connected to a subscriber Ethernet port in an Intercom system, this device
must be initialized manually in CCT 800. A migration of the device type is not supported. For further
information, see manual “
Intercom Server Configuration
”.
ATTENTION: Enter unique MAC address
In order to prevent interferences, make sure that an unique MAC address is entered!
