Commend Duetto EE 980, Руководство по эксплуатации продукта

Страница: 158 / 172

Appendix Control Station Duetto
158 1.7/1217
Example: Configuration of a PIN code dialogue
After the inactivity timeout has expired, the display of the DUETTO device is locked by a PIN code
dialogue. This dialogue can either be suppressed by entering a PIN code or by incoming SIP or
Intercom calls. After a SIP or Intercom call has been cancelled, the display is locked automatically.

Go to: CONFIGURATION > LOGIC RULES in the WebConfig ( see page 56 ).

Add a new logic rule. With this logic rule, the display is locked when the inactivity timeout has
expired and no pending calls are active. See the following screenshot:
Display is locked when the inactivity timeout has expired

Select the event “Inactivity timeout”.

In the drop-down list Timeout , select the desired timeout after which the display of the DUETTO
device shall be locked at inactivity.

Select the condition “Pending calls”.

In the drop-down list Number of calls , select the entry “0”. Thus, the selected event is only fulfilled
if no pending calls are active.

Select the action “PIN code dialog”.

(Optional) In the field Notification dialogue message , enter the text that is shown in the PIN code
dialogue on the display.

Add a new logic rule. With this logic rule, the display of the DUETTO device is unlocked when the
correct PIN code is entered. See the following screenshot:
Display is unlocked when the correct PIN code is entered
1.4.1