21
MACHINE PREPARATION
16. TURNING LIGHTS ON/OFF
The machine is equipped with two headlights and a rear spotlight, to help the operator to work in low
light. To switch on the headlights simply turn the switch (1) located on the instrument panel to the "I"
position and the green indicator light (2) on the instrument panel will immediately illuminate; the lights
will remain on until you again operate the switch.
17. SERVICE BRAKE – PARKING BRAKE
The machine has an electronic braking system. To brake, in normal conditions, just remove your foot
from the accelerator pedal. If this service brake is working badly, or if necessary, activate the brake
pedal (1) pushing it downwards.
In case of lack of oil in the braking system, the red warning light (2) on the instrument panel will come
on; check the level in the brake oil tank located behind the vehicle nose.
To engage the parking brake pull the lever (4) located near the seat, the red warning light (3) on the
instrument panel will come on.
18. WORKING FORWARD SPEED
This machine is equipped with electronic traction control. To move the machine, after turning the ignition
key to "ON - I", you must select the direction of movement by operating the switch (1) located on the
instrument panel.
1
1
2
4
2
3
1
