40
WEEKLY MAINTENANCE
5.
Check that the cap on the recovery tank drain hose (1) is closed
6.
Unscrew the recovery tank drain hose cap (2) at the rear of the machine
7.
Release the recovery tank stop hinges (3), located at the side of the tank
8.
Rotate the recovery tank as far as it will go
9.
Release the suction cover stop hinges (4), located at the side of the cover
10.
Rotate the suction cover as far as it will go
11.
Clean and rinse the recovery tank
12.
Refit all the parts
ATTENTION: These operations must be carried out using gloves to protect
against contact with dangerous solutions
43. CLEANING THE SOLUTION TANK
Proceed as follows for cleaning:
1.
Ensure that the electrical system connector is disconnected from the battery connector
2.
Ensure that the main switch is in the “0” position
3.
Check the parking brake is engaged
4.
Close the water tap (1)
5.
Disconnect the solution tank drain hose (2) located at the rear of the machine
6.
Unscrew the solution tank drain hose cap
7.
Unscrew the solution tank filling plug (3), located behind the operator's seat
8.
rinse the inside of the tank with a jet of water
9.
Refit all the parts.
ATTENTION: These operations must be carried out using gloves to protect
against contact with dangerous solutions
44. CLEANING THE DETERGENT TANK (VERSIONS WITH CDS)
Proceed as follows for cleaning:
1.
Ensure that the electrical system connector is disconnected from the battery connector
2.
Ensure that the main switch is in the “0” position
3.
Check the parking brake is engaged
3
2
3
1
1
2
2
