Columbus Instruments Exer 3, Инструкция по эксплуатации

Страница: 54 / 78

52
5.5.0 Profile Experiment Settings
Note: Controls not specified in the following procedure are “not needed”
as they are automatically updated and set by the profile.

Enter the “Interval” time in seconds which you would like to have data logged to the output file. The
number must be an integer and the minimum is 5 seconds.

Click-to-check “Enable Profile Mode”.

Disable the stimulus for the session by selecting “Off”. Else, enable by selecting “1Hz”, “2Hz” or
“3Hz”.

Enter the value of the “INTENSITY” from the Treadmill Controller into the “Stimulus Intensity” text
box.
Note: The software CANNOT control the stimulus intensity!
The electric stimulus intensity is manually set by the front panel of the Treadmill Controller.
Refer to section “
5.4.1 Stimulus Detection Settings
” if you would like to monitor and control the
presentation of stimuli.