Columbus Instruments Exer 3, Инструкция по эксплуатации

Страница: 59 / 78

57
SECTION 6
TREADMILL USER MENU
The User Menu is used to view and set various parameters which are saved within the Treadmill Controller.
Access to the menu is provided by a unique button presses when the treadmill belt mode is set to STOP and
not under computer control.
If under computer control (indicated by the speed setting displayed with
“
C
”
instead of
“
S
”
), press the
MODE button to set the treadmill belt to STOP. Then press the ODOMETER RESET button to restore
control back to the user.

Press and hold the RATE button.

Press and hold the MODE button.

Then press and release the ODOMETER RESET button.

Release the RATE and MODE buttons.
The screen will display:
And then position you in the menu at the option for automatic speed and distance odometer calibration:
The menu options are as follows:
o Restore Defaults
o Serial Number
o Run-Time Meter
o Odometer
o Fan Voltage
o Unit ID
o Baud Rate

Autocal Speed
o Accel
o Mode
(of operation)
o Calibrate Shock
o Exit

The “INTENSITY” knob is used to naviagate the options on the User Menu. Clockwise rotations will
move you up the list toward the top. Counter-clockiwse rotations will move you down the list toward
the bottom to exit the menu.

Press the ODOMETER RESET button to select an option to edit and to save any changes.

Use the “SPEED” knob adjust the settings/values while editing.
User
Menu
Autocal Speed