Columbus Instruments Exer 3, Инструкция по эксплуатации

Страница: 75 / 78

73
7.1.1 Removing Devices from the CI-Bus (continued)
The devices removed from the list of configured devices may still remain connected to the CI-Bus, even
powered on. As they are not in the list of configured devices, their presence will not be checked and not
used in an experiment. Of course, you may physically remove the devices from the CI-Bus so that they
may be used elsewhere:

Switch OFF the device and disconnect it from AC power.

Disconnect the CAT5 networking cables from the device. If it was the last device on the bus, remove
the orange terminator.

Reconnect the CAT5 networking cables as needed and install the orange terminator in the available
“CI-Bus” port of the last device.
7.2 Window
This menu contains the default options (Cascade, Tile Horizontal, Tile Vertical, Arrange the Icons)
Windows provides for positioning open windows within the main window.
7.3 Help
This menu contains links to the PDF user manuals of the devices the Treadmill Software expects to control:

Treadmill Manual (this manual)

Treadmill Stimulus Detection Manual

Inclinometer Manual
7.3.0 About
This reports the version of the Treadmill Software. Be sure to reference the version when contacting
Columbus Instruments for help.

Click the OK button to close the window and return to the main window.