Columbus Instruments Exer 3, Инструкция по эксплуатации

Страница: 39 / 78

37
4.3 Controlling the Treadmill
The following sections discuss various controls and their effect on the operation of the Treadmill
Controller.
4.3.0 Contrast / Odometer Reset
Turning the “CONTRAST” knob adjusts the LCD display contrast. Adjust for best viewing at any time.
In the Normal mode of operation, the odometer will display the accumulated distance traveled. When the
ODOMETER RESET button is pressed, the odometer will be reset and held at zero. It will begin to count
up when released.
In a Time Limit or Dist Limit mode of operation, the remaining duration of the session time or distance is
displayed. When the duration reaches zero, the treadmill belt will STOP, terminating the exercise session.
Simply replace the animals with the next group and press the ODOMETER RESET button. The duration
counter will be reloaded and automatically the treadmill belt mode will RUN again.
4.3.1 Speed / Mode
Turning the “SPEED” knob will adjust the set speed of the treadmill belt when it’s mode is set to STOP or
RUN.
Pressing the MODE button in the following ways will change the treadmill belt mode:
o
From STOP, press and release to go to RUN.
o
From STOP, press and hold to go to ACCELERATION.
o
From RUN, press and release to return to STOP.
o
From RUN, press and hold to go to ACCELERATION.
o
From ACCELERATION, press and release to return to STOP
o
From ACCELERATION, press and hold to go to RUN.
In another way:
o
Press and release will toggle between STOP and RUN.
o
Press and hold will toggle between RUN and ACCELERATION.
o
Press and release will go to STOP from RUN or ACCELERATION (Emergency STOP).