Columbus Instruments Exer 3, Инструкция по эксплуатации

Страница: 33 / 78

31
3.5 Setting the Angle of Inclination or Declination
The angle of inclination is set by the location of the spring pin in holes of the Inclination Rod. The holes
range from 0° to 25° in 5° steps. With the Downhill Running Adapter, the holes range from 0° to -15° in 5°
steps.

Lift the front of the treadmill to release the pressure on the spring pin and remove it from the
Inclination Rod.

Now position the treadmill slightly above the new height of inclination and replace the spring pin into
the corresponding hole in the Inclination Rod.

Slowly lower the treadmill onto the spring pin.