![background image](http://html1.mh-extra.com/html/colorjet/txf/txf_installation-and-troubleshooting-manual_2637924049.webp)
Page | 47
TXF
Step 4:
After finishing the test printing, press the Up or Down arrow buttons and select the
SIMPLE
SETTING
option to enter the correction value, as shown below:
Fig 63: Selecting the SIMPLE SETTING Option
Step 5:
Press the Right arrow button to select the
SIMPLE SETTING
option (Refer to Fig 64). The
SIMPLE
SETTING
screen appears.
Step 6:
Press the Left or Right arrow button and select the desired correction value, as shown below:
Fig 64: Feeding the Correction Value
Step 7:
Press the
ENTER
button to confirm the selection.
Now, the printer gets calibrated and also its Bi-DIR correction value is updated. Similarly, if SIMPLE
SETTING is not useful, then select the DETAIL SETTING option and follow the instructions that appear on
the Control Panel.