Page | 14
TXF
Step 4:
Remove the machine cover and check the door key hanging on the front right door of the handle.
Step 5:
Open all the four doors and remove the bolts to free machine from the pallet using 18mm Spanner.
Step 6:
Remove the pipes, tub assembly, and water tank from inside the machine.
Step 7:
Take out the levelers from the accessory box and keep them handy to fit in the lifted machine.
Step 8: Lift the machine up using the
fork lift and align the Fork Lift as per the given markings on the
machine to balance the clamp. In case of lifting with crane, ropes must be tied just near to pallet mounting
holes, (and strictly not near the extreme ends of the lower cabinet). Upper cabinet should be secured with
foam below the tied ropes.
Step 9:
While the machine is being lifted, fix all the levelers (8 levelers) in the given slot or holes.
Step 10:
Moving the levelers upmost will expose the wheels out, thrusting the levelers in, facilitating the
machine to glide easily to its allotted position by manually pushing it.
Step 11:
Check and verify the direction of printer facing as per the room plan and unload the machine.
Note:
Do not lift the
machine from it’s
extreme ends, as it may result in serious damage (sensitive
areas).
