Page | 57
TXF
Print Is Shifting WRT Fabric/Junk Printing
Reasons:
1.
Encoder scale is having ink stains (print shows vertical color bands)
2.
Encoder sensor is not clean
Remedial Actions:
Case 1:
Clean the Encoder scale, if stained, or replace it, if faulty.
Case 2:
Clean the Encoder Sensor or replace it, if faulty.
Lines In Prints
Reasons:
1.
Nozzle blocked in heads (check nozzle test)
2.
Incorrect feed step (calibration required)
3.
Conveyor Belt coupling is loose
Remedial Actions:
Case 1:
Perform Test Print to check the blockage in nozzles. (Refer to
Issuing the TEST PRINT Command
section).
Case 2:
Perform the step calibration and correct the step value. (Refer to
Feed Calibration
section).
Case 3:
Tighten the Conveyor Belt coupling. (Refer to
Tightening the Conveyor Bel
t section).