Page | 30
TXF
Step 9:
Once the glue seems to be deactivated, stop spraying liquid, and do simultaneously and quickly
below steps:-
•
Slightly rotate the Press Roller in opposite direction, to move the sticky portion upwards
away from the belt.
•
Lift the Press Roller from the both sides at a time and stop the glue cycle immediately
from the HMI screen.
Fig 21: Lifting Up the Press Roller
Step 10:
Remove the excess deactivated glue and throw in the waste bin. Wipe up only the area where
liquid is present, touching dry belt will damage the coating.
Step 11:
Once excess glue is removed, run glue cycle for 30-50 min with glue dryer on.
Step 12:
Wipe off the glue from the Press Roller, with the help of cleaner damp towel.
While cleaning the Press Roller, cover the belt surface with poly sheet to avoid the glue remains falling on
the belt surface.
Fig 22: Wiping Off the Glue from the Press Roller
