Page | 35
TXF
Step 5:
Adjust the
Fabric Tensioner
(as shown in Fig 33) such that the fabric get stretched and to remove
any slack. Do not over tension the fabric.
Fig 33: Adjusting the Fabric Tensioner
Step 6:
Press Belt Forward from HMI to feed fabric forward (Care to smooth out the wrinkles, if any). Pass
the fabric between the front Print Dryer and the Stretcher Rollers.
Fig 34: Pressing Belt Forward Icon
Step 7:
Insert the empty Core into the take-up roller, with Core holders at both edges.
Step 8:
Attach the falling edge of the fabric to the core by sticking evenly and properly.
Step 9:
Set the take up power to 70% approx. (depends on the fabric type) and switch on the take up in
HMI. Move the belt forward a little, so that fabric gets securely winded into the take up roller.
Fig 35: Setting Up the Take-Up Power
