30-
Reference: Keyboard
Operation
When you press this key, the Swimming display changes the lane status to waiting for a finish
touch. The display also updates the number of lengths to indicate the final lap. If pressed by
mistake, you must press the
-Touch
key to return the lane to its prior state or the
Split Arm
key
in that lane (see below for more information on the split arm keys).
Split Arm
Function
This key allows you to rearm a touchpad for a split touch after an invalid touch has occurred. It
subtracts 1 from the lengths swum and arms the pad immediately.
Operation
For example, in a relay race, a swimmer exiting the pool may trigger the pad. The pad registers a
touch that is invalid. To rearm the pad for the proper split touch before the swimmer in the pool
touches, press
Split Arm
in the affected lane.
Start
Function
This key is used as the backup start in case the primary system fail.
Operation
Do not press this key before the primary start system has sounded. The
Start
key also allows the
timing operator to start swimmers when no other start system is used.
Store/Print
Function
Stores the results of the race just completed in memory and prints the results. This indicates that
the race is over and finalizes the race results. The
Reset
key will do this function automatically
for you.
Operation
Press this key at the end of each race to tell the Swimming software that the race is completed.
The results of the current race are stored in memory and printed according to the print setup.
Содержание System 6
Страница 78: ......
Страница 86: ...82 Appendix D Scoreboard Definitions 96x192 Pixel LED Matrix or Video Board...
Страница 90: ......