Colorado time systems System 6, Руководство пользователя

Страница: 51 / 93

47- Reference: Softkeys
Option 3 Blank Scoreboard Module
Allows you to blank unused scoreboard modules.
Press 3 to select Blank Module(s) . Press the
Up or Down softkey until the arrow points at the desired module and press 1 to blank, as shown
in Figure 4-I. Repeat the procedure to un-blank a blanked module.
Figure 4-I Blank Scoreboard Module Window
Option 4 Number of Scoreboard Lines
Function:
Allows you to designate how many lines of scoreboard will be used. Normally you
would display 6 lanes of data on 6 lines of scoreboard. Option 4 allows you to rotate many lanes
of data through a limited number of scoreboard modules. To set this option for fewer modules
than you have lanes just press the #4 on the numeric keypad. Keep hitting the #4 key until the
screen number matches the actual number of scoreboard lines that you have. If you have a 6 lane
pool but only 3 lines of scoreboard, you should set this option to “3-Line Scoreboard.” This will
cause the board to display data from lanes 1-3 on the board. The timer will then automatically
switch the display to lanes 4-6, and continually cycle between the two. The length of time that
the data will be shown will be the number of seconds that you have defined below in option 6.
Operation: Press 4 to change the number of lines of scoreboard that you have set to display
swimming lane information. For example, if you have an 8 lane pool, but only 4 lines of
scoreboard, you can press this option until it reads “4-Line Scoreboard” and the scoreboard will
continuously cycle between showing lanes 1-4 and lanes 5-8.
Options
5, 6,
and
7
Function: Options 5 , 6 and 7 apply ONLY to scoreboards designated as 0F. Ordinarily, a single-
line scoreboard displays the race results by place at the end of the race and then displays the
programmed sequence. Feature (
5 ) allows you to set the number of times this information is