Colorado time systems System 6, Руководство пользователя

Страница: 6 / 93

2 Introduction
Liquid Crystal Display (LCD) Screen
Turn on your System 6 and load the Swimming program (refer to page 25, “Running
Swimming,” for loading instructions). The display screen provides you with a wide range of
information to help run your swim meets.
The screen always displays current race information including running time, the status of the
race, event and heat numbers and more. The Swimming software keeps you in full control of the
race situation at all times.
Battery
An internal lithium ion battery provides backup power in case of emergency or power outage. To
charge the battery, plug the System 6 into a grounded power outlet with the unit turned off. The
charge time of the battery is 3 hours. The battery will provide approximately 45 minutes of usage
time. This can be increased to 1 hour after 4 to 5 cycles of fully charging and fully discharging.
If you are discharging the battery, exit Swimming and let the timer run until it dies.
Softkeys
The softkeys located to the right of the display screen let you select from a variety of options.
You can:
•
Select the kind and format of printed race information.
•
Print a sponsor’s message on race printouts
•
Display detailed race information including backup button input and Relay judging
information.
•
Access special scoreboard control features.
•
Customize the Swimming software to meet your individual needs.
•
All setup information can be stored in memory for future races.
•
Program standard or special event sequences.
.
Keyboard Insert
The keyboard insert helps you run meets efficiently. You can:
•
Turn lanes on and off quickly with a single keystroke.
•
Quickly recover from missed or inadvertent touchpad hits.
•
Store and print race information with a single keystroke.
•
Edit times and enter DQ information.
•
Change the length of an event quickly and easily.