Colorado time systems System 6, Руководство пользователя

Страница: 67 / 93

63- Appendix A: Maintenance
Case
The System 6 case is made of high-impact plastic. Use any neutral detergent to clean the case.
Do not use alcohol, thinner or other solvents. These products can change the color or otherwise
damage the case.
Keyboard Inserts
The keyboard insert cover and upper overlay should be cleaned with a mild detergent and water
solution and wiped dry with a soft cloth as needed. Install the keyboard insert carefully. Guide it
into the keyboard pocket, keeping it as straight as possible.
Cables
Cleaning
Inspect all cable and in-deck connectors for corrosion before use. All connectors must be
corrosion-free if your timing system is to operate properly.
To clean cable or in-deck connectors you need rubbing alcohol, silicone grease and cotton swabs.
Follow the instructions below and refer to Figure A-3 for reference.
1) Pour a few drops of rubbing alcohol into the cable or deck plate jacks and let it sit for several
minutes to dissolve corrosion.
2) Insert a cotton swab into the jack and use a plunging motion to clean the jack.
Figure A-3 Clean Cable Connectors as shown
3) Rinse the jack with a damp cloth swab and dry it with a dry swab.
4) Apply a small amount of silicone grease to a clean cotton swab and insert into the jack.