19
C) Assembling the Gravity Feed Tube
Locate the parts needed to assemble the gravity feed
tubes. This should include: A) Splash guard, B) Orings
(2per), C) Outer regulating sleeve, D) Center gravity feed
tube
Next, slide the two orings onto the center gravity feed
tube oring grooves.
Slide the outer regulating sleeve onto the center feed tube.
Make sure that the two finger hooks are at the top of the
feed tube (farthest away from the orings at the bottom).
B
D
C
A
Insert the splash guard into the top hole of the
gravity feed tube.
Lightly lubricate both orings on each tube with the
sanitary lubricant. When finished, place a feed tube
uninstalled at the bottom of each mix tank.
The machine is now completely assembled and ready
to be sanitized.
Lubricate
