30
Remove the feeding elbow assembly from the mix
tank by first sliding the connecting tube away from
the pump cover, Then turn the elbow assembly
slightly and pull the assembly straight up and out of
the mix tank.
Remove the mix pump assembly from the mix tank
by rotating the pump clockwise until the hook stud
disengages from the rear pump hub. After
disengaging the hook stud, pull the pump assembly
straight forward and out of the mix storage tank.
Please ensure that the mix pump drive shaft and seal
must also be removed at this time.
After removing the parts from the mix storage tank,
fill the mix tank with luke warm (80-90F) water and
a non-foaming dish washing detergent solution.
571.2
L2
L3
Press the Push to Select button on the front touch pad
(#571.2), and carefully select the Beater mode. Allow the
machine to run for 1 – 2 minutes then push the Stop /
Reset button (#571.1) on the touch pad. Drain all of the
water and soap solution from the machine. Repeat this
process until the water drained is clear.
Prior to draining the last time, brush clean all surfaces of
the mix storage tank with the cleaning brushes provided
with the freezer.
Drain the remaining water and soap solution from the
freezer.
