18
Spread the lubricant to lightly coat the piston
surface between and including the orings. This
will ensure free movement of the pistons and
dispensing handle.
Insert the piston into the chamber of the
dispensing head. When installing, align the
square handle recess with the rectangular cut
out of the head.
Turn over the dispensing head and insert the
two large orings into the grooves in the
dispensing head.
Lightly
lubricate the outside of
these orings.
Install the dispensing handle onto the head by placing the
rounded side of the metal cam into the piston notch. Insert
the metal retaining rod into the dispensing head and
piston cams. When the handle is installed, affix the small
oring into the metal retaining rods oring groove.
You are now ready to install the dispensing head
assembly onto the front of the freezer.
Finger tighten the two metal dispensing head-retaining
knobs.
