Cole Parmer MB-200-40, Инструкция по эксплуатации

Страница: 24 / 60

Page 21 of 60
If Store is selected the display will then show “PST STORE XX” with the
number showing the ID for the next empty location. For example if PST 01,
02, & 03 are already stored the next number is PST 04. If the user wishes to
overwrite a previously stored value they can change the number and
continue. Using the up/down arrow keys, [Dspl/ ] and [Test/ ]. If the user
has stored positions 1,2, and 4 then when this process begins the first blank
location is PST 03, so that is the value to be displayed. Then the next time
PST 05 would be shown.
Press [Setup/Enter] to select the PST number shown. If this number already
has a test method stored, then ask if the test should be overwritten. To
continue the user must press [Setup/Enter] to overwrite the old results and
store new ones.
Pressing the [
0/T
   
/ Esc] key will escape without clearing the old result.
When storing a test procedure the user has the option of adding a text or
numeric name to the test. The top display will show “PST NAME” then show
“- - - - - - - - - “. To enter a name, use the [Dspl/ ] or [Test/ ] keys to cycle
through numbers and letters. Use the [PST/
] or [Print/
   
] key to move the
flashing digit to the left or right.
— . / 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
PST STORE
PST STORE
05
OVERWRITE?
© 2022