Cole Parmer MB-200-40, Инструкция по эксплуатации

Страница: 32 / 60

Page 29 of 60
10.1 SUPERVISOR MENUS
Pressing the [Setup/Enter] key while in normal weighing gives access to the
menus.
When [Setup/Enter] is pressed and passcodes are not enabled the display
will show the first section of the menus, Serial interface. If passcodes are
enabled, the analyzer will ask for it by displaying :
With the right digit flashing.
Enter the correct passcode using the numeric entry method.
If a wrong code is entered the analyzer will return to weighing mode.
If the passcode has been enabled and entered, the analyzer will allow the
operator to access the Supervisor’s menus.
The [Dspl/ ] and [Test/ ] keys will cycle through the main headings,
pressing the [Setup/Enter] key will enter the heading and sub-parameters or
options can be set. Press [PST/
] to come out of a sub-menu and go up
one level or [ 0/T

 

/ Esc] to return to normal weighing from any menu.
PASSCODE
000000
© 2022