Cole Parmer MB-200-40, Инструкция по эксплуатации

Страница: 43 / 60

Page 40 of 60
Basic Input Commands:
!KT<CR>
Tares the analyzer to display the net weight. This is the same as
pressing the [
0/T

 

/ Esc] key when the analyzer is in the normal
weighing mode.
!KS<CR> Will begin or end a drying test, the same as pressing the [Start] key.
11.4 PRINTING RESULTS
The balance can print results during a test at the time intervals selected, see
section 6.1.1. In this case the format of the printing will be as shown below.
The first section will print the initial conditions and the settings used for a
test. During the test the current results will be printed. At the end of the test
the final results will be printed.