Cole Parmer Electrothermal RAK30 HW & R, Инструкция по эксплуатации

Страница: 15 / 24

15
Page 15 of 24 M7819 Issue 4.2
WARNING.
NON-POTABLE / DIRTY WATER. Only use clean, potable water
when cleaning & sanitising the HW & R. Non-potable or dirty water can cause
contamination of clean water or food.
CAUTION.
IMMERSION IN WATER. Do not immerse the HW & R in water. The
ingress of water into the control panel can result in the HW & R becoming
non-operational.
CLEANING MATERIAL. Only use the authorised cleaning materials.
Materials such as metal scouring pads can cause damage to the surface
finish.
DISHWASHING COMPOUND. Discard hand dishwashing compound /
heated water solution inn accordance with the disposal instructions.
NOTE: With the HW & R mounted in the host vehicle it is not necessary to
disconnect the power supply when performing the cleaning procedures.
Cleaning Inner / Outer and tap assembly.
9.2.1. To prepare the HW & R for cleaning and sanitising, switch OFF the unit and
remove the cover and inner container.
Clean the Inner / Outer Containers and Tap. Perform the following
procedural steps in the given order:
Note: If necessary for cleaning purposes, the fold-down wire handle can
be removed from the inner container before performing step 9.2.2.