Cole Parmer Electrothermal RAK30 HW & R, Инструкция по эксплуатации

Страница: 17 / 24

17
9.2.16. To prevent the ingress of liquid into the interior of the cover, block off the
small steam hole in the seal retaining plate using an easily removable means.
(e.g. tapered wooden peg of suitable size).
9.2.17. Remove any loose food from the seal retaining plate and cover seal by prescraping.
9.2.18. Using a scrub brush or a scouring pad, scrub the seal retaining plate until it is
free of any persistent food residue and / or discolouring.
9.2.19. Wash the cover with the hand washing compound / heated water solution
retained from previously taking care not to avoid splashing or immersing the
pressure release valve.
9.2.20. Allow cover to air dry.
9.2.21. On the cover, unblock the small steam hole in the seal plate.
9.2.22. Remove any loose food from the main case seal by pre-scraping.
9.2.23. Wipe the case seal with a clean cloth which has been soaked in a hand dishwashing
compound / heated water solution.
9.2.24. Wipe the case seal with a damp cloth to remove all traces of hand dishwashing
compound.
9.2.25. Clean the main case using a cleaning cloth and the hand dishwashing compound /
heated water solution previously retained. Take care to avoid splashing the control
panel.
9.2.26. Rinse the main case in clean, potable water to remove all traces of hand dishwashing
compound taking care to avoid splashing the control panel.
9.2.27. Allow main case to air dry.
Page 17 of 24 M7819 Issue 4.2
9.2.16. To prevent the ingress of liquid into the interior of the cover, block off the
small steam hole in the seal retaining plate using an easily removable means.
(e.g. tapered wooden peg of suitable size).
9.2.17. Remove any loose food from the seal retaining plate and cover seal by pre-
scraping.
9.2.18. Using a scrub brush or a scouring pad, scrub the seal retaining plate until it is
free of any persistent food residue and / or discolouring.
9.2.19. Wash the cover with the hand washing compound / heated water solution
retained from previously taking care not to avoid splashing or immersing the
pressure release valve.
9.2.20. Allow cover to air dry.
9.2.21. On the cover, unblock the small steam hole in the seal plate.
Cleaning the Main Case.
9.2.22. Remove any loose food from the main case seal by pre-scraping.
9.2.23. Wipe the case seal with a clean cloth which has been soaked in a hand
dishwashing compound / heated water solution.
9.2.24. Wipe the case seal with a damp cloth to remove all traces of hand
dishwashing compound.
9.2.25. Clean the main case using a cleaning cloth and the hand dishwashing
compound / heated water solution previously retained. Take care to avoid
splashing the control panel.
9.2.26. Rinse the main case in clean, potable water to remove all traces of hand
dishwashing compound taking care to avoid splashing the control panel.
9.2.27. Allow main case to air dry.