User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
39
7 Trouble Shooting the Clock
This section is a guide to basic trouble shooting of potential problems for
this clock.
7.1.1
Display is blank
1)
Obvious cause – power cord not plugged in, no power at outlet. I
had to ask….
2)
Clock is in Display Off mode (see section 5.1.15). Pressing either
the mode or the function button will enable the display (for 1
½
minutes). Set a new OFF time, or disable completely (see section
5.1.18). Also, display is Auto ON/OFF mode and it is dark. The
clock could also be in weekend or weekday display OFF mode (see
section 5.1.11).
3)
CPU locked up, remove power for 10 seconds, reapply power.
Clock should go through display self-test (see section 4). Enter
correct time and date.
4)
Clock failed, contact ColdWarCreations for repair work
([email protected]).
7.1.2
Time not working
1)
Display blank, see section 7.1.1.
2)
Display or part of display digits blinking. Clock not in normal time
display mode. Note: Time will blink during New Year’s Eve, see
section 5.1.20). Press and hold mode button (right side) until the
display goes blank, release button. Clock will now be in normal
mode. It may be necessary to set the time/date to the correct value,
see section 5.1.1.
3)
Display shows ’00 00 00’ or ’11 11 11’ … ’99 99 99’. Clock is in
Anti-cathode poisoning mode (see section 5.1.12). Press either the
mode or function button to cancel this mode. The clock will return
to normal mode (for one day, the next day the clock will start the
anti-cathode poisoning mode at the programmed time).
7.1.3
Date is not displayed properly
1)
Clock must be in Display Options 01, 03, 11, 13, 21, 23, 31, or 33
to display the date (see section 5.1.9).
2)
If the format is wrong (mm-dd-yy, dd-mm-yy or yy-mm-dd),
check date format option (see section 5.1.8).
Содержание Glass Nixie Tube Clock #3 IN-14
Страница 1: ...Glass Nixie Tube Clock 3 IN 14 Version User s manual...
Страница 41: ...User manual Glass Clock Design 3 rev 3 2...
