User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
9
Set time mode
When the clock is in the set time mode, the current time will be
displayed with the hours (2 leftmost digits) blinking “00:00”. The
left most colon will be on steady (no blinking) and the seconds will
be off.
If the colons are blinking, the clock is still in the normal display
mode, and the red mode button on the right side should be
momentarily pressed to enter the set time mode.
Note: If the clock loses time (first setup, or without power for an
extended period of time) the time displayed will be all zeroes:
0:00.
To skip setting the time and go directly to setting the date,
momentarily press the red mode button to skip the time set
functions.
To cancel setting the time value at any point, press and hold the red
mode button until the display goes blank. This will cancel setting
the time/date. When the mode button is released, the clock will go
back to the normal display. The old time value will be used.
Содержание Glass Nixie Tube Clock #3 IN-14
Страница 1: ...Glass Nixie Tube Clock 3 IN 14 Version User s manual...
Страница 41: ...User manual Glass Clock Design 3 rev 3 2...