User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
7
4 Unpacking and setting up the Clock
Carefully unpack the clock from the box. The box contains a wall plug-in
power supply, the user manual and the clock itself.
The power supply plugs into the wall outlet. The other end plugs into the
clock’s power input jack.
When powered up for the first time, the clock will go through the self-
test checkout. This checkout will set all the digits to '9', and each digit
(starting with the leftmost digit) will count down from '9' to '0'. When
this is complete the display will read “00 00 00”. Then each digit will go
blank one at a time starting with the leftmost digit. This completes the
self-test.
The clock has two control buttons. On the back left is a black function
button, and on the back right is a red mode button.
At this point, the clock should show “0:00” with the leftmost digits
(hours) blinking. It is now in the time/date set mode. There is no need to
press the right mode button to enter the time set mode. Go to the next
section, “Setting the clock”. Note: Due to the time save function of the
clock, if it was disconnected from power less than 8 hours ago, it will not
enter the time set mode – it will show the current time.
Illustration 2: Side View, Right
Illustration 1: Side View, Left
Содержание Glass Nixie Tube Clock #3 IN-14
Страница 1: ...Glass Nixie Tube Clock 3 IN 14 Version User s manual...
Страница 41: ...User manual Glass Clock Design 3 rev 3 2...
