User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
33
Changing clock board options
There are several clock and system options available that can be
changed by the user. When changed, these options will be saved to
permanent memory. They will be saved even if the power is off for
an extended period of time.
Enter the board options mode by pressing and holding the black
function button (left side) until the display goes blank. Keep
pressing the black function button, and then momentarily press the
red mode button until the colons alternate blinking (left on/right
off, left off/right on, etc). Release both buttons.
After releasing both buttons, the colons will continue alternating
blinking, and the display will show the board’s serial number in the
4 right most digits.
Momentarily pressing the red mode button will go to the next
option. When the red mode button is pressed at the last option, it
will go back to option 0 (serial number).
Pressing and holding the red mode button will exit the clock board
options mode.
Table of clock board options
Option 0
Board serial number
Option 1
Temperature offset value
Option 2
Auto off light level set point value
Option 3
Time display interval set point value
Option 4
Time/date display interval set point value
Содержание Glass Nixie Tube Clock #3 IN-14
Страница 1: ...Glass Nixie Tube Clock 3 IN 14 Version User s manual...
Страница 41: ...User manual Glass Clock Design 3 rev 3 2...
