User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
11
5.1.3
Setting the time – change hours for Daylight Savings
When changing hours for Daylight Savings time, only the hours
need to be changed, the minutes and seconds will stay the same.
Seconds will continue to count up during the hours set.
When the hours (leftmost) digits are blinking, the hour value can
be changed.
The black function button on the left side will change the hour
value when pressed. Holding the function button on will quickly
cycle through the hours (0-23). Note: When setting the hours, 24
hour mode is used, regardless of the hour format setting (12/24
hour display mode). This means '00' is 12 AM (midnight), and '13'
is 1 PM (afternoon). The hour format setting will be used when
displaying the time normally.
Once the hours are set to the proper value, press the red mode
button (right side) momentarily. The clock will then blink the
minutes. Press and hold the red mode button until the display goes
blank. Let go of the red mode button.
Now that the time is set, the clock will go to the set date mode.
Press and hold the red mode button until the display goes blank.
Let go of the red mode button.
The time is now changed, and the display will go back to normal
time display. Only the hours were changed, the minutes and
seconds are unchanged, and seconds continued to count.
Also an available function to automatically adjust the time for
Daylight Saving Time, see the Options section. Will change the
hour +1 or -1 depending on the time of year. Available in USA-
Canada, Europe or Australian DST zones.
Содержание Glass Nixie Tube Clock #3 IN-14
Страница 1: ...Glass Nixie Tube Clock 3 IN 14 Version User s manual...
Страница 41: ...User manual Glass Clock Design 3 rev 3 2...
