Cold War Glass Nixie Tube Clock #3 IN-14, Руководство пользователя

Страница: 36 / 44

User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014 36
6.1.3 Option 2 – Auto Off Light Level value
Display: “02
☐☐ ☐☐
” , ‘02’ blinking.
This option changes the Auto Off light level value.
" This is the level that turns off the display.
" The value range is 4 to 25, 4 is the lowest level, 25 is the
highest. Set to lower number to trigger OFF at a darker
ambient light level.
A blinking '02' will be displayed in the 2 leftmost digits, indicating
Option 2, Auto off light level value. To change the level value,
momentarily press the black function button (left side). This enters
change value mode, the ‘02’ will stop blinking.
Change the current value by pressing the black function button.
Holding in the black function button will speed up the change rate.
This will increase the value.
To change the direction of the change (value goes up or down),
momentarily press the red mode button, this will toggle the right
most colon on/off:
o
Right most colon off – black button will increase
value.
o
Right most colon on – black button will decrease
value.
o
Note: The right most colon does not indicate if the
value is + or -, only the direction the value changes
when the black button is pressed.
To exit the change value mode, press and hold the red mode button
until the display goes blank. Release the mode button and the clock
shows a blinking option number.