User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
10
5.1.1
Setting the time - hours
When the hours (leftmost) digits are blinking, the hour value can
be changed. Note: If changing only the hours, the clock will
continue to count seconds, making Daylight Savings time changes
easier.
The black function button on the left side will change the hour
value when pressed. Holding the function button on will quickly
cycle through the hours (0-23). Note: When setting the hours, 24
hour mode is used, regardless of the hour format setting (12/24
hour display mode). This means '00' is 12 AM (midnight), and '13'
is 1 PM (afternoon). The hour format setting will be used when
displaying the time normally.
Once the hours are set to the proper value, press the red mode
button (right side) momentarily. The clock will then go to the
minutes set mode.
5.1.2
Setting the time – minutes
When the minutes (middle) digits are blinking, the minutes value
can be changed.
The black function button (left side) will change the minute value
when pressed. Holding the function button on will quickly cycle
through the minutes (0-59).
After the minutes are set correctly, momentarily press the red
mode button (right side). At this point, all the digits
(Hours:Minutes:Seconds) will flash once a second. Pressing the
mode button again will update the time to the new settings. Note:
The seconds value will be reset to '00' when the time is set.
Now that the time is set, the clock will go to the set date mode.
Содержание Glass Nixie Tube Clock #3 IN-14
Страница 1: ...Glass Nixie Tube Clock 3 IN 14 Version User s manual...
Страница 41: ...User manual Glass Clock Design 3 rev 3 2...
