User manual – Glass Clock Design #3
rev 3.2
!
Cold War Creations, 2014
27
5.1.16
Setting the OFF time
The OFF time setting is indicated by the leftmost colon on.
Setting the display OFF time is accomplished by using both the
mode button and the function button.
The hours digits will be flashing on and off once a second. The
black function button will change the hour value. Holding the
function button on will quickly cycle through the hours (0-23).
Note: When setting the hours, 24 hour mode is used, regardless of
the hour format setting (12/24 hour display mode). This means '00'
is 12 AM (midnight), and '13' is 1 PM (afternoon).
Once the hours are set correctly, press the red mode button to
change to the minute value. When the mode button is momentarily
pressed, the minutes digits will flash on and off once a second. The
black function button will change the minute value. Holding the
function button on will quickly cycle through the minutes (0-59).
After the minutes are set correctly, momentarily press the red
mode button. At this point, the OFF time setting is complete, and
will now show the ON time setting (ON time hours digits are
flashing).
To cancel setting the OFF time value at any point, press and hold
the red mode button until the display goes blank. This will cancel
setting the OFF time. When the mode button is released, the clock
will go back to the normal display.
Note: When the clock is in Auto ON/OFF mode, the display will
only be off when the light level is dark.
After the OFF time is set, the ON time is set next.
Содержание Glass Nixie Tube Clock #3 IN-14
Страница 1: ...Glass Nixie Tube Clock 3 IN 14 Version User s manual...
Страница 41: ...User manual Glass Clock Design 3 rev 3 2...
